An extension cord is one of the most commonly used tools and techniques by traders. Because of his popularity, he is also, unfortunately, responsible for many industrial accidents that occur every year. But extensions are not dangerous if they are used correctly, and many incidents that occur every year when they are used can be avoided.
Why use a sliding ladder?
Extension ladders are an incredibly useful, practical and effective tool. There is no better and more efficient way to work at heights than with an extension. By increasing many times the original length, you can set, scale and work in height in minutes with elongation. Alternatives, such as using scaffolding and cranes to pick cherries, are too expensive, take a lot of time to install, or both.
When to use the sliding ladder
Not all work requiring work at height requires a retractable ladder. Often when working at a low height, stairs are enough. Roof stairs can often be used to climb to a height, so evaluate what type of stairs you need for your job which is perfect in order to have excellent results.
How to use and a ladder
There are five steps to using the retractable ladder safely:
- Inspect: the staircase should be inspected for bending, cracks, warping, or any other breakage. Pay particular attention to the feet and legs. The area in which you work should also be inspected. Make sure it is flat and even. It should also not have loose gravel or earth stones. Make sure there is room for work.
- Vertical: if necessary, extend the ladder. Do not overdo it; there must be a lock so that it does not spread too much. If not, be sure to leave a few steps for safety. When climbing to the wall, make sure you have a good angle. Too steep and the stairs may fall; too shallow may slip.
- Leg: let someone climb the stairs if possible. Make sure that the feet are level and that the ladder does not slip or fall, read more at abovethefloor.net.
- Climbing: hold three points of contact while climbing. The tools should be on the belt or raised after that, never lift with full hands.
- Work: make sure that you do not work too high. Make sure you have three steps. Do not fit or fasten tools if necessary. Work calmly; do not make sudden or abrupt movements that may cause the stairs to swing.